Note

If a password already exists, this message appears:

Power-on password already installed

The Setup program does not allow you to enter a new password if you have already set one. However, you can easily change or delete the current password if you know it. See "Using a Power-on Password” in Chapter 3 for instructions.

4.To enter a password, type any combination of characters (including letters, numbers, and blank spaces) up to a total of seven characters. You can use the backspace key to delete mistakes.

Do not use characters requiring the Shift key, such as @, $, or * in your password. The computer does not recognize the Shift key when you use your password to access the system.

Caution

Be sure to remember the password you enter or write it down and keep it in a safe place. If you cannot remember your password, you will not be able to access the computer the next time you turn it on.

If you want to return to the password submenu without saving any changes, press ESC.

5.After you enter a password, press Enter to return to the password submenu.

6.If you want to change the network server mode setting, highlight Network server mode. To turnnetwork server mode on or off, press Enter.

2-10 Running the Setup Program