Memory Module Problems

If you added extra memory to your system by installing SIMMs and that memory is not operating properly, check the following:

1.If the memory count displayed by the power-on diagnostics program is incorrect, you or your dealer may not have installed the SIMMs correctly. They may be installed in the wrong sockets, they may be the wrong type of SIMM, or they may not be inserted all the way into their sockets. (Keep in mind that the memory count does not include 128KB of the standard 2MB of memory.)

If your dealer installed SIMMs for you, contact your dealer; do not attempt to correct the problem yourself. If you installed the SIMMs, see “Adding Memory Modules” in Chapter 6 and make sure you have followed all the necessary instruct ions.

2.Be sure to run the Setup program after you install or remove memory modules to automatically update your memory configuration. See Chapter 2 for instructions.

3.If you are still having trouble with your SIMMs, write down any error messages that appear and contact your dealer.

Math Coprocessor Problems

If your math coprocessor does not seem to be operating properly, check the following:

1.Run the Setup program on your Reference diskette and check to make sure that the math coprocessor is listed as installed on the Exit display. If it is listed as not ins t al led, you or your dealer may have installed the math coprocessor incorrectly. See Chapters 2 and 6 for more information.

Troubleshooting A-27