Setting the Diskette Drive Type(s)

Your Equity 386SX/20 PLUS probably came with one factory- installed diskette drive. If you added a second diskette drive or removed one, you may need to change the diskette drive settings to match your configuration. If you haven’t made any changes, you can verify your drive type settings. Follow these steps:

1.At the main menu, highlight Diskette drive. The current settings appear:

Drive A: 1.2 MBDrive B: None

If the diskette drive types on the screen match your diskette drive configuration, you can skip the rest of this section.

2.To change a setting, press Enter. The cursor block moves into the diskette drive submenu and you see the following:

Not installed 360 KB drive720 KB drive (3.5")1.2MB drive1.44MB drive (3.5")

You also see the message Selected drive light

i s ON. This tells you that the light on the diskette drive currently selected is on.

3.If you want to change the drive A settings, be sure Drive A: is highlighted and press Enter. If you want to change the drive B settings, highlight Drive B : and press Enter. The cursor block moves into the submenu.

Running the Setup Program

2-25