4 . Locate one of the power supply cables that lead from the power supply in the computer (behind the horizontal drive bays). The cables are labelled P1, P2, or P3 and have a clear plastic connector on one end. One cable is already attached to the diskette drive; you can use either of the remaining two cables. As shown below, the end of the connector has two notched comers.
power supply cable | power supply socket |
notched corners | notched corners |
The power supply socket is on the back of the hard disk drive, next to the ribbon cable you just connected. The socket also has two notched comers, as shown above.
Pulling the power supply cable through the lower opening on the right side of the subassembly makes it easier to reach the socket on the drive.
Installing and Removing Disk Drives |