Follow these steps to set the real-time clock:

1. At the

main menu, highlight Real-time clock. If

the time and date have been set previously, the current

settings

appear:

Time 0 9 : 1 6 : 5 2

Date 0 1 - 2 9 - 1 9 9 1

If the time and date are correct, you can skip the rest of this section. If the time and date are incorrect, go to step 2 below.

If the time and date have never been set, the submenu contains a template for you to fill in:

Time xx:xx:xx

Date xx-xx-xxxx

2.Press Enter to move the cursor block into the submenu.

3.To set or change the time, press Enter again. You see this box:

hh:mm:ss

(hh stands for hours, mm stands for minutes, and s s stands for seconds.)

4.Using a 24-hour clock, enter the time in the exact format shown in the box. Type two digits for each part; the Setup program automatically inserts the colons ( : ). For example, to set the time to 130 p.m., you would type the following:

133000

Running the Setup Program

2-17