Selecting an Option

When you are using the System diagnostics program, you often

need to select an option from a menu. There are two ways to do this:

0You can use the arrow keys (? L c -)) to highlight the option you want and then press Enter to select it.

DYou can type the number of the desired option and press Enter to select it.

For example, you may see this menu:

1- Run test one time2 - Run test multiple times0 - Exit

Suppose the first option is highlighted. If you want to select that option, just press Enter (because it is already highlighted). If you

want to select option 2, you can either press or 2; this causes the cursor block to move to that option. Then press Enter to select it.

Note

You can press Esc any time you want to leave the menu currently displayed and return to the previous one.

C - 4 Performing System Diagnostics