Setting the Hard Disk Drive Configuration

If your computer came with a factory-installed hard disk, your hard disk configuration has already been set and you can skip this section.

If you installed or removed a hard disk, follow these steps to set the computer’s hard disk configuration:

1.At the main menu, highlight Hard disk drive. Your current settings appear, such as the following:

Drive 1: Type 60Drive 2: None

The Type number indicates the type of hard disk installed in your computer. See your hard disk documentation for the correct drive type number. (If that documentation does not give the drive type number, it may list the drive’s parameters which you can use to identify the drive type number.) Then consult the Hard Disk Drive Types table on page 2-23 for a list of the types you can use in your computer.

The None after Drive 2 indicates that there is no second hard disk.

If the displayed settings match your hard disk configuration, skip the rest of this section.

If a setting is incorrect, or if you want to see more details about your hard disk configuration, go to step 2.

Running the Setup Program

2-19