How to Use This Manual

This manual explains how to set up and operate your computer, install options, and run diagnostics checks. The illustrations show a computer with a 51/4-inchdiskette drive, but instructions for using a 3½-inch drive are also included.

Note

Although this manual provides tips for using MS-DOS, it does not explain how to use an operating system. See your operating system manuals for comprehensive instructions on installing and using the operating system.

You do not need to read everything in this book; see the following chapter summaries.

Chapter 1 provides simple step-by-step instructions for setting up your system. On the back cover foldout are illustrations showing the different parts of your computer; refer to these as you set up your system.

Chapter 2 describes how to run the Setup program to define your computer’s configuration. Do this before you use your computer. You may need to do it again later if you change the configuration.

Chapter 3 provides instructions for important operating procedures, such as using and caring for disks and disk drives.

Chapter 4 describes specialized features you can use to enhance your system’s performance.

Chapter 5 contains instructions for removing the cover and subassembly and then replacing the subassembly and cover.

Chapter 6 describes some of the options you can use in your computer and contains instructions for setting jumpers and installing options.