Continuing From an Error Message
If your computer has never been set up, you may see an error message and prompt(s), such as the following:
1 6 2 - System options not set(Run SETUP in REFERENCE DISK)(Resume = "F1" key)If you see an error message like this one, follow these steps:
1.Press F1. The computer beeps and the screen displays an error message and prompt, such as the following:
Error(s) detected+Incorrect configuration Set default value ? ( Y / N )
The error message beside the diamond indicates the condition causing the error. There may be more than one error listed in the message. Here are some of the error messages you may see:
Time is invalid
HDD and/or HDC failed initialization Memory size is incorrect, correction made Cacheable range is adjusted
Incorrect configuration Checksum is incorrect HDD is incorrect
Some errors, such as Time is invalid, do not allow you to set a default value, so the screen does not display the Set default value prompt. If you see one of these errors, press ESC; the screen displays the main Setup menu so you can enter a new setting.