Locate the diskette drive ribbon cable; one end is connected to the top diskette drive and the other end is free. Use the connector in the middle of the cable to connect the second diskette drive. As shown in the next illustration, there is a large slot in this connector with a small plastic divider near one end of the slot.
The interface that protrudes from the back of the drive has gold contacts on both sides. Near one end of the interface, there is a gap to accommodate the plastic divider on the connector.
2.Align the connector with the interface so that the plastic divider on the connector lines up with the gap in the interface.
divider
gap
Installing and Removing Disk Drives |