If your hard disk does not match one of the drive types listed in the Hard Disk Drive Types table, go to step 7.

6.Highlight Type and press Enter. The current type number appears:

I Type 60 I

Now select the drive type number that matches your hard disk configuration in the Hard Disk Drive Types table.

You can enter the drive type in one of two ways:

DYou can type the drive type number and press Enter. The screen displays the new number and settings.

0You can use the cursor keys to scan through the drive type numbers. This is a handy way to verify new hard disk settings before you press Enter because the settings list is updated as you display each new type.

After you select the appropriate drive type number, press Enter. The screen displays the new number and hard disk settings. Go to step 8.

7.If the configuration of the hard disk does not match one of the drive types listed in the Hard Disk Drive Types table, highlight User de fined and press Enter. You see the following:

I Number of cylinders 776 (

The same parameter is highlighted on the submenu above. Enter the correct number of cylinders and press Enter.

Running the Setup Program 2-21