Epson 3865X/20 PLUS VGA, Display, CGA 40 column, CGA 80 column, Monochrome 80 column, EGA,MCGA,VGA or other, Remap VGABIOS at C000, EGA,MCGA,VGA or other

1.At the main Setup menu, highlight Display. A submenu appears identifying the current display adapter type, such as the following:

VGA

If the display adapter type is correct for your system, you can skip this section.

2.To change the display adapter setting, press Enter. The cursor block moves into the submenu and you see an additional menu on the right side:

CGA 40 columnCGA 80 columnMonochrome 80 columnEGA,MCGA,VGA or otherRemap VGABIOS at C000

3.Press Enter to move the cursor block into this submenu and then use T or J to highlight the option that matches your display adapter type. If you are not sure which one to choose, follow these guidelines:

0If you are using the built-in VGA adapter or have installed a VGA, EGA, or MCGA card, select

EGA,MCGA,VGA or other.

QIf you have a color graphics adapter (CGA) or a multi- mode graphics adapter (MGA) attached to an RGB (color) monitor, select CGA 80 column. (Also set the color/mono switch on the MGA card to color.)

Running the Setup Program 2-7