0 If you want information about more than one command you | __ |
can type HELP followed by the names of the commands, |
|
each separated by a space. |
|
To use the HELP program, follow these steps:
1.If you don’t have a hard disk, make sure your Working diskette is in drive A.
2. If necessary, type A : and press Enter to log onto drive A.
3.If you want to use the HELP menu, type HELP and press Enter. Use the cursor keys to highlight the command you want information about and press Enter.
If you want to bypass the HELP menu and see information about one command, type HELP followed by the name of that command. For example, to see help information about the COPY command, type the following and press Enter:
HELP COPY
If you want to see information about more than one command, type HELP and the names of the commands you want information about. Separate each command name with a space, as in the following example:
HELP DISKCOPY FORMAT COPY
The HELP information for the first command is displayed first.
4.If there is more than one screen of information about the command, you see the prompt PgUp at the top of the screen. Press the PgUp key to display the next screen of text.