If there is yet another screen of text, you see both PgUp and PgDn at the top. Press PgUp to display the next screen of text or PgDn to see the previous screen. On the last page of text you see only PgDn at the top.

5.If you used the HELP menu to chose your help information, press ESC to return to the menu.

If you requested information about more than one MS-DOS command in the HELP command line, press ESC to see information about the next command.

6.Press ESC to exit the HELP program.

Using the Epson MENU Program

The Epson MENU program lets you display a menu of commonly used MS-DOS commands and select the one you need. It provides an easier way to run MS-DOS commands because you can execute commands without having to remember their exact syntax.

To access MENU, follow these steps:

1.If you do not have a hard disk, insert your Working diskette into drive A and log onto that drive.

2.At the MS-DOS command prompt, type MENU and press Enter. You see this main menu:

EXIT

File Utilities

Disk Utilities

Mode Settings

Help

1 Enter DOS Command

Using MS-DOS with Your Equity 386SX 4-37