2.Insert the working copy of your Reference diskette into drive A.

3.If necessary, type A: and press Enter to log onto drive A.

4.At the A> prompt, type CORFIX and press Enter. The following messages appear:

This program will configure the system to work with the SMART utility when installing the RampagePlus 286.

SMART can only be

executed

--

immediately after

this

 

configuration program.

 

Continue ? (Y/N)

 

 

5.To configure your computer for use with RampagePlus 286, press Y. (If you want to exit to MS-DOS without configuring your computer, press N.) If you press Y, you see the MS-DOS A> prompt and this message:

Configuration completed. The SMART installation utility may now be used.

6.Use the SMART setup program now. See your RampagePlus 286 manual for instructions.

You can also execute CORFIX from your hard disk if you copied the CORFIX utility from the Reference diskette to your hard disk.

5-24 Installing Options