3.To select an option, use the arrow keys to highlight the option you want and press Enter. Most options contain submenus; keep highlighting your selection and pressing Enter until you select the desired operation.

MENU works by calling external commands which it looks for on the current disk or path. If you do not have a hard disk and the diskette in the current drive does not contain a command called by MENU-for example, BACKUP.COM-you may see an error message like this when you select an option:

BACKUP.COM is not on the current disk or path.

Press any key to continue...

If you see a message similar to this one, insert the diskette that

 

contains the command you selected into drive A and try again.

 

(To see which commands are on which MS-DOS diskettes,

 

refer to the list of your Working diskette contents in the

 

MS-DOS Installation Guide.)

__

 

Note

If you find that you often have to swap diskettes when you use MENU, see the description of MENU in your MS-DOS Reference Manual for some recommended solutions.

4-38 Using MS-DOS with Your Equity 386SX