
1.At the main Setup menu, highlight Display. You see the current display adapter card type, such as the following:
Monochrome 80 column
If the display adapter card type is correct for your system, you can skip this section.
2. To change the display adapter card setting, press Enter. The cursor block moves into the submenu and you see:
CGA 40 column
CGA 80 column
Monochrome 80 column
Special Adapter
The last option in this menu displays the type of display adapter card you installed if it is an EGA, VGA, or MCGA card. If you installed a different type of display adapter card or a type listed as one of the first three options, you see Special Adapter as the fourth option.
3.Press Enter to move the cursor block into this submenu and then use ? or L to highlight the option that matches your display adapter card. If you are not sure which one to choose, follow these guidelines:
Cl If you have a VGA, EGA, or MCGA card, select the fourth option.
Cl If you have a color graphics adapter (CGA) or a multi- graphics adapter (MGA) attached to an RGB (color) monitor, select CGA 80 column. (Also be sure to set the color/mono switch on the MGA card to color.)
Running the Setup Program