Some errors, such as Time i s invalid, do not allow you to set a default value, so the screen does not display the Set default value prompt. If you see one of these errors, press ESC; the screen displays the main Setup menu so you can enter a new setting.
Note
If you see the message
l o s t power, contact your Epson dealer. You cannot correct this error using the Setup program.
2. Be sure Y is highlighted and press Enter. The Setup program changes the setting that caused the error to a setting that is more likely to match your system configuration. The screen displays the main Setup menu:
Exit
Display
Password
Fast boot
Auto speed
Hard disk drive
Diskette drive
Serial / Parallel
You should check all the settings in the Setup program to make sure they are correct for your system. The default value for the setting that caused the error may not be the correct one for your particular configuration.
Running the Setup Program |