For example, you may see this menu:

1 - Run test one time

2 - Run test multiple times

0 - Exit

Suppose the first option is highlighted. If you want to select that option, just press Enter (because it is already highlighted). If you want to select option 2, you can either press 1 or 2; this causes the cursor block to move to that option. Then press Enter to select it.

Therefore, when the instructions in this appendix tell you to select an option, you can either use ‘l’, -1, t, or + to highlight the option or you can type the number of the option. Then press Enter. (You must press Enter to start the operation.)

You can press ESC any time you want to leave the menu currently displayed and return to the previous one.

Modifying the Device List

If an installed device is missing from the Device List, you must add it to the list and test it carefully. At the following prompt, select N.

DEVICE LIST is correct ? (Y/N)

C - 4 Performing System Diagnostics