Reviewing Your Settings
When you finish using the Setup program to define your computer’s configuration, press ‘? to highlight Exit at the main Setup menu and press Enter. The following Setup summary appears on the screen:
M e m o r y | Extended memory | 384 | KB |
| Base memory | 6 4 0 | K B |
Password | not installed | ||
| Network server mode | OFF |
|
Display | type | Monochrome 80 column | |
Fast boot | enabled |
If you see an error message on the first Setup summary screen, see “Adding an Optional Memory Card” later in this chapter.
There are two more Setup summary screens you need to check. To display the next screen, press PgDn. You see the following:
clock | Time |
| 13:40:38 | |||
|
|
| Date |
| ||
Auto speed |
|
| disabled | |||
Coprocessor |
|
| not | installed | ||
Diskette | drive | Drive | A: | 1.44 | MB | |
|
|
| Drive | B: | None |
|
Serial |
|
|
|
| Primary | |
Parallel |
|
|
|
| Primary | |
|
|
|
|
|
|
|