You can change the angle of the keyboard by adjusting the legs on the bottom. Turn the keyboard over and lift each leg upward until it locks into place, as shown below. You can lock the legs to a low or high position, or leave them flat.
7 Turning On the Computer
After you set up your system, you’re ready to turn on the power. But first, read the following safety rules to avoid accidentally damaging your computer or injuring yourself:
Ll Do not dismantle any part of the computer. Only remove the cover to install or remove optional devices or change jumper settings. If there is a hardware problem you cannot solve after reading the information on troubleshooting in Appendix A, check with your Epson dealer.
DAlways turn off the power, disconnect the computer’s power cord, and wait five seconds before you remove the computer’s cover.
Ll Do not unplug cables from the computer when the power is on.
Setting Up Your System