Removing the Cover
To install an option card, you need to remove the cover from your Equity 386SX. Follow these steps:
1.Turn off the computer and then any peripherals (including the monitor and printer) that are attached to it.
2. Disconnect the computer’s power cable from the electrical outlet and from the back panel. Then disconnect any peripheral cables that are connected to the computer.
3.Disconnect the keyboard.
4.If the monitor is on top of the computer, lift it off and set it to one side.
5. As shown below, the top cover is secured by five screws on the back panel and four screws on the side panels (two on each side). Remove the screws and set them safely to one side so you do not lose them.
- s c r e w s
Installing Options