If you have a 5 ‘/+inch diskette drive, hold the diskette with the label facing up and the read/write slot leading into the drive.
Slide the diskette into the slot until it is in all the way. Then turn the latch down to lock it in a vertical position. This keeps the diskette in place and enables the read/write heads in the diskette drive to access the diskette.
To remove the diskette, turn the latch up until it is horizontal and the edge of the diskette pops out. Carefully pull out the diskette, place it in its protective envelope, and store it in a proper location, such as a diskette container.
WARNING
Never remove a diskette or turn off the computer while the diskette drive light is on. You could lose data. Also, be sure to remove all diskettes before you turn off the computer.
Using the Equity 386SX