If the jumper setting is incorrect, move it to the correct setting. You do not have to remove the SIMM card to change the jumper setting.

Replacing option cards

To replace any option cards you may have removed to access the main system board, reinstall the card in the appropriate slot and secure it to the back of the computer with the retaining screw.

Removing an Option Card

If you later need to remove an option card, simply reverse the steps you followed to install it. Remove the screw securing the card to the back of the computer and pull the card straight up and out of the slot. Then carefully wrap the card, preferably with the original packing materials, and place it inside its box for safe storage. Cover the end of the empty option slot with the original metal cover and secure it with the retaining screw.

Installing Options

5-21