Continuing From an Error Message

If your computer has never been set up, you may see an error message, such as the following:

162 - System options not set

(Run SETUP in REFERENCE DISK)

(Resume = "F1" key)

If you see an error message like this one, follow these steps to proceed:

1.Press F1. The computer beeps and the screen displays messages, such as the following:

!!!!!Error(s) detected !!!!!

The error message following the diamond indicates the condition causing the error. There may be more than one error listed in the message. Here are the error messages you may see:

Time is invalid

HDD and/or HDC failed initialization Memory size is incorrect, correction made Incorrect configuration

Checksum is incorrect

Real-time clock has lost power

2-4 Running the Setup Program