Chapter 2
Running the Setup Program
The first time you use your Equity 386SX, you need to run the Setup program on the Reference diskette to define the computer’s configuration. This is a simple procedure you must do at least once. (You may need to do it again later, if you change the configuration.)
The Setup program lets you set (or change) the following for your computer:
Type of display adapter (video) card installed
Fast boot function
Auto speed function
Hard disk drive configuration
Diskette drive type(s)
Serial and parallel port settings.
The configuration you define with the Setup program is stored in the CMOS RAM, which is permanent because it is backed up by a battery. Whenever you turn on the computer, it searches the CMOS RAM for the correct installation information.
The Equity 386SX automatically defines your system’s memory configuration and recognizes a math coprocessor, if you have installed one. If the computer discovers a difference between the information in the CMOS RAM and its actual configuration, it prompts you to run the Setup program.
Running the Setup Program |