WARNING

Be sure to remember the new power-on password you enter or write it down and keep it in a safe place. If you cannot remember the password you enter now, you will not be able to access your computer the next time you turn it on.

3.Press Enter. A happy face character appears and then the computer loads MS-DOS.

To access the computer the next time you turn it on or reset it, you must enter the new power-on password.

Deleting a Power-on Password

To delete your power-on password, follow these steps:

1.If you do not have a hard disk, insert your Startup diskette in drive A.

2. Turn on or reset the computer. At the key prompt, enter your current power-on password followed by a forward slash. For example, if your password is 123, type:

1 2 3 /

3.Press Enter. A happy face character appears and then the computer loads MS-DOS.

The next time you turn on or reset the computer, it does not request a password and loads MS-DOS immediately.

3-4 Using the Equity 386SX