If the time and date are incorrect, go to step 2 below.

If the time and date have never been set, the submenu contains a template for you to fill in:

Go to step 2 to enter the time and date.

2.Press Enter to move the cursor block into the submenu.

3.To set or change the time, press Enter again. You see this prompt:

4. Using a 24-hour time period, enter the time in the exact format shown in the box. Type two digits for each part; the Setup program automatically inserts the colons ( : ). For example, to set the time to 1:30 p.m., you would type the following:

1 3 3 0 0 0

You can use the backspace key to make corrections.

Note

If you want to use the number keys on the numeric keypad to enter the time or date, press the Num Lock key to enable Num Lock mode. The Num Lock light is on when Num Lock mode is enabled.

Running the Setup Program

2-15