If you want to use your computer as a network server, you must turn on network server mode. (A network server is the master computer in a network which provides storage space for the other computers connected to it. The network server can write files to and read files from the other computers in the network.) To turn on network server mode, you must set a power-on password.

If you do not want to set a power-on password or turn on network server mode, skip this section.

Follow these steps to set a power-on password (when one does not exist) and turn network server mode on or off:

1.At the main Setup menu, highlight Pas sword. This submenu appears:

Power-on password

Network server mode OFF

2.Press Enter. The cursor block moves to Power-on

password.

Note

If a password already exists, this message appears:

Power-on password already installed

The Setup program does not allow you to enter a new password if one already exists. However, you can easily change or delete the current password if you know it. See “Using a Power-on Password” in Chapter 3 for instructions.

3.Press Enter. You see this prompt:

r-7

Running the Setup Program 2-9