SETTINGS Setup menu.

To enter a password, type any combination of characters (including letters, numbers, and blank spaces) up to a total of seven characters. Use the backspace key to delete mistakes.

Do not use characters requiring the SHIFT key, such as $, @, or *, in your password. The Equity 386SX does not recognize the SHIFT key when you use your password to access the system.

WARNING

Be sure to remember the password you enter or write it down and keep it in a safe place. If you cannot remember the password you enter now, you will not be able to access the computer the next time you turn it on.

If you want to return to the password submenu without saving any changes, press ESC.

4.After you enter a password, press Enter to return to the password submenu.

5.Highlight Network server mode. To turn network server mode on or off, press Enter.

The Setup program requires a power-on password to turn network server mode on. If you did not enter a password, this message appears:

Set a power-on password first

To enter a password, highlight Power-on password and follow steps 3 and 4 above.

6.After you enter a power-on password and turn network

server mode on or off, highlight * * * * SAVE

* * * * and press Enter to return to the main

2-10 Running the Setup Program