Note

The Setup program automatically saves the time and date when you press Enter after typing-each one. If you change the time or date and then exit the Setup program without saving your changes, the new time and date still take effect.

Setting the Hard Disk Drive Configuration

If your computer came with a 40MB or 100MB hard disk, your computer’s hard disk configuration has already been set for you at the factory and you can skip this section.

If you installed or removed a hard disk, follow these steps to set the computer’s hard disk configuration:

1.At the main Setup menu, highlight Hard disk drive. Your current settings appear:

Drive 1: Type 17

Drive 2: None

The Type number indicates the type of hard disk installed in your computer. See Appendix E for a list of hard disk drive types, and the documentation supplied with your hard disk to find the correct type for the hard disk drive installed in your computer.

The None after Drive 2 indicates that there is not a second hard disk.

If the displayed settings match your hard disk configuration, you can skip the rest of this section.

If a setting is incorrect, or if you want to see more details about your hard disk configuration, go to step 2.

Running the Setup Program

2-17