Using the Ethernet Card

Note:

To verify that the DLC protocol is installed correctly, check the list of installed Network Software in the Network dialog box.

Installing the DLC Protocol

Make sure Windows NT is running, and follow these steps to install DLC:

1.Open the Control Panel.

2.Double-click the Network icon.

3.Click the Protocols tab and then click Add.

4.Select DLC Protocol from the Select Network Protocol list, and click OK.

5.Follow the instructions on the screen and reboot your system.

Configuring the Ethernet Card

After you have installed the DLC protocol, follow these steps to configure the card and your printer for Window NT 4.0:

1.Double-click My Computer, then double-click the

Printers icon.

2.Double-click the Add Printer icon.

3.Select My Computer, then click Next.

4.Click Add Port.

5.Select whatever DLC network port setting you have on your system, then click New Port.

If necessary, insert your Windows NT CD-ROM or diskette so Windows can copy the files.

6.Type a name for the port in the Name box. Make sure the name is not the same as an existing port, such as LPT1.

6-6