Managing Print Jobs
Note:
You may not see screens for all the steps here, depending on your computer’s configuration.
Write down your settings in the spaces provided. You can refer to them if multiple systems are monitoring the printer.
4.Select Monitor from restart (to begin background monitoring on the printer after your next system restart), Monitor now (to begin background monitoring right away), or Stop monitoring now (to stop background monitoring).
5.Now set your monitoring preferences for the printer as described on page
Changing Status Monitor 2 Settings
You can run through the Setup program and change your settings without uninstalling and reinstalling Status Monitor 2. This procedure allows you to change any of the following settings:
◗number of hops
◗types of printers you can monitor
◗EPSON TCP/IP printing
You can also run this program any time you install the printer software and Status Monitor 2 is unable to find the printer.
Follow these steps to change your settings:
1.In Windows Explorer or My Computer, find the folder where your EPSON Status Monitor 2 files are located (ESM2 is the default) and
2.Close any open programs and click Next.
3.If you are using Windows 95 and you have TCP/IP installed, you see a screen asking you if you want to enable EPSON TCP/IP printing. Select Yes if you want to print with TCP/IP, and then click Next. If you are printing with Novell NetWare, select No.
TCP/IP Printing: Yes_______ No_______