Introduction

◗At least 50MB of free hard disk space for storing images (100MB or more is recommended)

◗VGA, Super VGA, or better display adapter and monitor

◗Double-speed CD-ROM drive (quad-speed or faster recommended) for installing the printer software

◗Network connection to Ethernet

◗A twisted-pair (10BASE-T) or thin coaxial (10BASE2) cable (with a 50 ohm terminator, if necessary) to connect the printer’s Ethernet card to your network.

Macintosh System Requirements

To use your printer and its software with a Macintosh, your system should have:

◗Any Macintosh or Power Macintosh model except the Macintosh +, Macintosh 512, Performa® 410, PowerBook® 100, and some early versions of the Macintosh, such as the II or Classic

◗System 7.1 or later (7.5 or later recommended)

◗At least 16MB of RAM (20MB or more is recommended)

◗At least 50MB of free hard disk space for storing images (100MB or more is recommended)

◗13-inch RGB display or better

◗Double-speed CD-ROM drive (quad-speed or faster recommended) for installing the printer software

◗Network connection to Ethernet

◗A twisted-pair (10BASE-T) or thin coaxial (10BASE2) cable (with a 50 ohm terminator, if necessary) to connect the printer’s Ethernet card to your network.

2