Using the Ethernet Card

2.Create a model script. For example, type:

vi/usr/spool/lp/model/lan.model

3.Type the following:

MODEL=’basename $0’ REALMODEL=’echo $0 /sed -e “s%$MODEL %model.lan/$MODEL%”’

#This variable may be initialized when the script is installed in the spooler.

PERIPH= if (“$PERIPH”=””) then

PERIPH=$MODEL

fi

#Path for output of the original model TMPPATH=/tmp/$MODEL.data

#Invoke original model and write to temporary file $REALMODEL “$@”TMPPATH

#Log onto peripheral, switch to binary, and send the temporary file

( echo user xx echo binary

echo put $TMPPATH echo bye

) ftp -i -n $PERIPH ERRSTAT=$? /bin/rm $TMPPATH exit $ERRSTAT

*End of Script*

Using Novell NetWare Modes

You can use the card in one of three modes under Novell NetWare: Print Server mode, Remote Printer mode, or Auto Print Server/Remote Printer mode. This section offers an explanation of how these modes work. Setup for each of these modes is covered in the Setup Guide.

6-22