Note:
If you are making Status Monitor 2 diskettes, make sure you label the diskettes for both parts carefully, so you do not mix up the network diskettes and the
Using Floppy Diskettes
You see a screen similar to the following:
4.Click Copy to copy the first diskette. You see a screen showing the progress as the files are copied to the diskette. For multiple diskettes, when the first diskette is finished, the installer prompts you to insert disk 2.
Make sure you label each diskette in order as you create it:
Status Monitor 2, network part, disk 1 of 2, etc.
5.If you have to create more than one disk, insert the next disk and click Copy. Repeat this step for a third disk if necessary.
6.When the diskettes have finished copying, click Quit and then click OK.
After you have created all the diskettes you need, you can install the software by reading the sections that start on page