Custom Printing
Note:
If your monitor displays only 16 colors, the Intensity adjustments are not shown in the Layout graphic. If you choose the No Halftoning setting, the Intensity setting does not determine how your watermark is printed.
3.Now select the way you want the watermark to appear by choosing the following options. The Layout graphic changes to reflect all the settings you choose.
◗Color lets you choose a color for your predefined watermark: Red, Black, Blue, Aqua, Lime, Fuchsia, or Yellow. You cannot select a color for a custom watermark; it is printed in its original colors.
◗Intensity sets the lightness or darkness of the watermark (from 5% to 100%) based on where you move the slidebar.
◗To adjust the size and position of the watermark, move the cursor over the Layout graphic. Four boxes appear in the corners of the graphic and the cursor changes to a hand.
Click and drag anywhere in here to move the watermark
Click and drag one of 
the corner boxes to resize the watermark
To move the watermark, click anywhere inside the graphic and drag it into one of five positions: center,
To resize the watermark, move the cursor over one of the corner boxes; the cursor changes to a pointing hand. Click and drag the box corner to reduce or enlarge the watermark.
4.If you’re finished changing Layout options, click OK to close the Layout dialog box.