wWarning:
Never move the print head while the printer is turned on;
this can damage the printer.
3. Turn the ribbon-tightening knob in the direction of the arrow
to take up any slack in the ribbon.
4. Hold the ribbon cartridge with the exposed ribbon down and
the ribbon-tightening knob facing you.
As shown below, guide the ribbon under the print head, and
snap the cartridge into place from left to right so that the
tabs on both sides of the cartridge fit into the notches in the
cartridge holder. Then pivot the bottom of the cartridge
into place.
Me-9
Me-10
LMaple Rev.D
A5 size Chapter 1
97/06/17 pass 0
1-6 Setting Up the Printer