Using the Error Indicators If a printer error occurs, you can use the error notificatio n
methods, a patt ern of beep so unds and message s that appear
on the display on the control panel, to help determine the cause
of the problem and the solution. Use the following table to
diagnose and fix t he problem.
State of
panel light Beep
pattern Display
message Problem
Solution
n Paper Out
n Pause
•••
Paper Out NNo paper loaded in the
selected paper source.
Load paper in the sele cted feed
path; the Paper Out and Pause
lights go off and the p rinter
resumes printing.
Paper is not loaded correctly.
Remove and reload your paper
correctly, then press the Pause
button. See Chapter 3 for
instructions on how to load the
type of paper you want to use.
n Pause Wrong
Paper Size The paper type loaded in your
printer differs from that
registered with the EPSON Label
Form Utility.
Load the same type of label
paper you previously r egistered
with the EPSON Label For m Utility
or use the utility to register the
new type of paper. Then press
the Pause button.
Wrong
Paper path Your operation does not meet
the settings in the Paper Select.
Remove the paper in the printer
and reload the paper you use
referring to page 3-31 to 3-35.
Then press the Pause button.
8
Troubleshooting
R
Maple Rev.D
A5 size Chapter 8
06/17/97 pass 0