Epson DLQ-3000+ All the text is printed on the same line., The printout has extra blank lines between lines of text., 8-22

Top margin and loading
position settings made in
your Windows applications
override settings you make in
the SelecType mode.
Use your application software to make
these settings.
Note:
If you want to eliminate the top margin
and print at the very top of the page,
adjust the top margin in your Windows
application little by little until text is
printed at the very top of the page.
All the text is printed on the same line.
Cause What to do
No line feed command is sent
at the end of each line of text. Turn on the auto line feed option in the SelecType mode or the EPSON
Remote! utility so that the printer
automatically adds a line feed code to
each carriage return. See “SelecType”
on page 4-8, or “Using the prin t e r
utilities” on page 2-22.
The printout has extra blank lines between lines of text.
Cause What to do
Two line feed commands are
being sent at the end of each
line of text.
Turn off the auto line feed option in
the SelecType mode or the EPSON
Remote! utility. See “SelecType” on
page 4-8, or “Using the printer
utilities” on page 2-22.
The line space setting in your
application software is
incorrect.
Adjust the line space setting in your
application software.
LMaple Rev.D
A5 size Chapter 8
06/17/97 pass 0
8-22 Troubleshooting