Epson DLQ-3000+ The typestyles or characters set in your application software cannot be printed., Printing starts too high or too low on the page.

The typestyles or characters set in your application software
cannot be printed.
Cause What to do
Your application software is
not correctly configured for
your printer.
Make sure that your application
software is correctly configured for
your printer. See your application
documentation.
The printer does not print the font you selected using the
SelecType mode or the EPSON Remote! utility.
Cause What to do
Software settings override
settings you make in the
SelecType mode or EPSON
Remote!.
Use your software to select the font.
Printing starts too high or too low on the page.
Cause What to do
The paper size settings in
your application software do
not match the size of the
paper loaded in the printer.
Change the paper size settings in your
application software or printer driver
to match the size of the pap e r you are
using.
The top margin or loading
position setting is incorrect. Check and adjust the top margin and loading position settings in your
software or SelecType. See the
printable area specifications in
Appendix A. However, settings made
in Windows applications
override settings made in SelecType
mode.
8
Troubleshooting
R
Maple Rev.D
A5 size Chapter 8
06/17/97 pass 0
Troubleshooting 8-21