❑The ratio of the cut/uncut length at the perforation should be
between 3:1 and 5:1. And expansion at the perforation (when the
paper is kept flat) should be less than 1mm (0.04 inch) as
following.
❑If you use continuous paper whose page length (A in the next
illustration) is under 101.6 mm (4.0 inches), mak e sure that the
length between folds (B) is over 101.6 mm (4.0 inches.)
Width 101.6 to 406.4 mm (4.0 to 16.0 inches)
Length/page 101.6 to 559 mm (4.0 to 22.0 inches)
Copies 1 origin al + 6 co pies (when Dark is selected in
SelecType 2.)
Total thickne ss
single sheets 0.065 to 0.12 mm (0.0025 to 0.0047 inch)
multi-part forms 0.12 to 0.53 mm (0.0047 to 0.021 inch)
Weight
single sheets 52.3 to 105 g/m2 (14 to 27 lb)
multi-part forms 40 to 58g/m2 (11 to 15 lb) (weight/part)
Quality Plain paper, recycled paper, and carbonless
multi-part forms multi-part forms with spot gluing or paper
stapling on both sides
3 mm cut
1 mm uncut
1 mm or more
Me-75
B
AMe-33
LMaple Rev.D
A5 size Appendix A
06/17/97 pass 0
A-6 Specifications