Attaching the paper guides
To attach the front and rear paper guides, follow these steps.
1. Slide the edge guides slightly to the center. Hold the front
paper guide horizontally with both hands. Slide the slots on
both sides of it onto the mounting pegs in the printer as
shown below. Then lower it until it locks into place.
2. In the same way, place the rear paper guide clips over the
mounting pins and bar ; then lower it until it locks into
place.
Me-013n
Me-14
LMaple Rev.D
A5 size Chapter 1
97/06/17 pass 0
1-8 Setting Up the Printer