Epson DLQ-3000+ The top-of-form position of your continuous paper varies when you print several pages.

Your paper may be the
wrong size or thickness for
the printer.
Make sure that the paper size and
thickness are within the specified
ranges. See the continuous paper
specifications on page A-5.
The sprocket units are
positioned incorrectly for
the width of paper you are
using.
Adjust the position o f the sprockets
to remove any slack along the width
of the paper.
Note:
If paper is jammed in the paper path, see
“Clearing a Paper Jam” on page 8-24.
The top-of-form position of your continuous paper varies
when you print several pages.
Cause What to do
The paper size setting in your
application or the printer
driver may not match the size
of the paper you are using.
Check the paper size setting in your
application or the printer driver.
The printer’s page length
setting may not match th e
size of the paper you are
using.
Check the “Page Tractor” setting using
the SelecType mode or the EPSON
Remote! utility. See “SelecType” on
page 4-8, or “Using the printer
utilities” on page 2-22.
Your paper may be too heavy. Make sure that the weight of your
paper is within the specified range.
See the continuous paper
specifications on page A-5.
8
Troubleshooting
R
Maple Rev.D
A5 size Chapter 8
06/17/97 pass 0
Troubleshooting 8-13