Epson DLQ-3000+ The cut-sheet feeder feeds more than one sheet at a time., Paper feeding is crooked., 8-16 , When the printer ejects the paper, the Paper Out flashes and the Pause light comes on.

The cut-sheet feeder feeds more than one sheet at a time.
Cause What to do
You may have loaded too
many sheets in the bin. Remove some sheets. See page A -19 for information on the types and
quantity of paper that can be loaded
with the cut-sheet fe e der.
Sheets of paper are stuck
together. Remove the paper stack, fan it, and then reload it.
Paper feeding is crooked.
Cause What to do
The right and left paper
guides are too far apart. Position the paper guides to match the width of your paper.
The paper is old or creased. Use only new, clean sheets of paper.
You may not be using the
right type of paper for the
cut-sheet feeder. For example,
your paper may be too heavy
or too light.
Make sure your paper meets the
requirements of your printer and
cut-sheet feed er. See the pape r
specifications and the optional
cut-sheet feeder specifications on page
A-19.
When the printer ejects the paper, the Paper Out flashes and
the Pause light comes on.
Cause What to do
The printer has not fully
ejected your paper. Remove the paper by hand; the Paper
Out light goes out. Press the Pause
button to resume printing.
LMaple Rev.D
A5 size Chapter 8
06/17/97 pass 0
8-16 Troubleshooting