2. Select Overlapping Form mode using SelecType 2.
cCaution:
❑Printing on the edge of overlapping multi-part forms
can damage the print head.
❑Be sure to select Overlapping Form mode when
using this type of paper; otherwise your printer may
be damaged.
3. Follow the instructions in “Loading co ntin u ou s pape r wi th
the tractor” on page 3-14.
To tear off and eject overlapping multi-part forms
Always tear off and eject overlapping multi-part forms
according to the procedure below.
Note:
In Overlapping Form mode, the Tear Off button is disabled and
the Load/Eject button only feeds forms forward.
1. At the back of your printer, tear off the last overlapping
multi-part form that has entered the printer.
2. Press the LF/FF button to eject the last overlapping multi-part
forms forward.
LMaple Rev.D
A5 size Chapter 3
97/06/17 pass 0
3-30 Paper Handling