Load ing ove rlappin g mult i-part f orms wit h labe ls
1. Make sure of the following:
❑Your software settings keep the printing entirely within
the printable area. For information about the printable
area, see the paper specifications on page A-13 and
A-14.
❑The paper release lever is set to tractor position.
❑The setting in Page Tractor in SelecType 1 matches the
page length of the form you us e.
Note:
In Overlapping Form and modes, the printer
automatically activates the AUTO paper thickness function even
though the paper thickness lever may be set to another position.
2. Press the Paper Select button to select and make sure
the # message appears on the control panel display.
3. Follow the instructions in “Load in g co ntin u ou s pape r with
the tractor” on page 3-14.
cCaution:
❑Printing on the edge of overlapping multi-part forms with
labels can damage the print head.
❑When loading overlapping multi-part forms with labels,
make sure the left edge of the form is no further than 3 cm
to the left of the arrow mark (when facing the back of the
printer).
LMaple Rev.D
A5 size Chapter 3
97/06/17 pass 0
3-34 Paper Handling