Epson DLQ-3000+ When the printer ejects the paper, the Paper Out flashes and the Pause light comes on., Continuous paper The printer does not load continuous paper.

Your paper may be too long. Make sure the page length of your
paper is within the specified range. See
the single-sheet paper specifications
on page A-4. Also check and adjust the
paper size setting in your application
or the printer driver.
When the printer ejects the paper, the Paper Out flashes and
the Pause light comes on.
Cause What to do
The printer has not fully
ejected your paper. Remove the paper by hand; the
Paper Out light goes out. If you are
printing a multiple-page document,
insert a new sheet of paper into the
paper guide. The Pause light goes out
and the printer automatically loads the
paper and resumes printing.
Continuous paper
The printer does not load continuous paper.
Cause What to do
The paper release lever is set
to the single-sheet position. Set the paper release lever to the tractor position. See “Setting the paper
release lever” on page 3-4.
The paper has come off the
tractor. Reattach the paper to the tractor as described in “Loading continuous
paper with the tractor” on page 3-14.
8
Troubleshooting
R
Maple Rev.D
A5 size Chapter 8
06/17/97 pass 0
Troubleshooting 8-11