Labels When selecting labels for printing, always choose labels
mounted on continuous backing sheets with sprock et holes for
use with a tractor. Do not use labels on shiny single-sheet
backing, because the backing sheet tends to slip and may not
feed properly.
cCaution:
Use labels only under normal operating conditions because
labels are especially sensitive to temperature and humidity.
Load ing lab els
1. Make sure of the following:
❑Your software settings keep the printing entirely within
the printable area. For information about the printable
area, see the paper specifications on page A-8.
cCaution:
Printing on the edge of a label can damage the print head.
❑The auto tear- off function i s turned off in SelecType 2.
❑If you use labels whose backing sheet is exposed, make
sure the paper thic k ness lever is not set to AUTO. Set it
to the appropriate position according to the table on
page 3-6.
2. Load labels as described in “Loading continuous paper with
the tractor” on page 3-13.
3
R
Maple Rev.D
A5 size Chapter 3
97/06/17 pass 0
Paper Handling 3-25