cCaution:
Use envelopes only under normal operating conditions.
Load ing env elopes
1. Make sure that your software settings keep the printing entirely
within the printable area. For information about the printable
area, see the paper specifications on page A-10.
cCaution:
Printing on the edge of an envelope can damage the print
head.
2. Select Envelopes mode using SelecType 2.
3. Follow the instructions in “Using Single Sheets” on page 3-7
or “Loading paper from the cut-sheet feeder” on page 6-5
and load envelopes as shown below. Be sure to fold the flap
and be careful of the flap’s orientation.
4. Make sure that the right edge guide is aligned with the arrow
on the paper guide, and position the left edge guide to
match the width of your envelopes.
from the front paper guide from the rear paper guide
*Insert envelopes with this orientation
when loading from the cut-sheet feeder.
bottom edge first and
flap side down
top edge first and
flap side down
3
R
Maple Rev.D
A5 size Chapter 3
97/06/17 pass 0
Paper Handling 3-27